The maintenance of the fully automatic carton partition assembling machine is actually not difficult, with three key points: daily cleaning, regular lubrication, and timely replacement of vulnerable parts. Persist in doing it, the machine can last longer and have fewer malfunctions.
1、 Daily maintenance (per shift/per day)
Cleaning equipment: After the work is completed, use a clean cloth to wipe the surface of the machine, especially the conveyor belt, grid cutter and other parts, to prevent the accumulation of paper scraps and dust.
Inspect vulnerable parts: Check for wear, looseness, or damage to the grid cutter, conveyor belt, etc., and replace or tighten them promptly if any problems are found.
Lubrication key parts: Perform simple lubrication on moving parts such as guide rails and bearings to reduce friction.
2、 Regular maintenance (weekly/monthly)
Comprehensive inspection: Check all mechanical components (such as motors, cylinders, and transmission devices) weekly, tighten loose screws, and clean internal dust accumulation.
Deep cleaning and lubrication: Conduct a deep cleaning of the automatic partition assembling inserting machine once a month, thoroughly remove oil stains, and add lubricating oil to all lubrication points.
Calibration and debugging: Regularly check the accuracy of the grid size and adjust the mold parameters if necessary to ensure stable product quality.
3、 Precautions
Safety first: Before maintenance, be sure to turn off the power and lock it with a tag to prevent accidental startup.
Record maintenance: Establish maintenance logs to record the content of each maintenance, the parts replaced, and the problems discovered, in order to track the status of the equipment.
Professional training: Operators should receive professional training to understand the carton partition assembly machine structure and maintenance points, and avoid improper operation.
4、 Common problem handling
Abnormal noise: Immediately stop the machine and check whether the transmission components such as bearings and gears are worn or loose.
Uneven grid insertion: Check if the grid insertion knife is worn, if the mold is loose, and adjust the positioning device.
Equipment jamming: Check if the conveyor belt is off track or slipping, clean up foreign objects, and adjust the tension.
In case of complex faults (such as PLC program errors), contact us for technical support.
If you are also interested in this machine,please don’t hesitate to contact us:
Overseas manager: Tom Wang
Email:cartonmachine.tomwang@aliyun.com
Phone/Wechat/Whatsapp:+86 13303078975
