The production process of heavy carton has several main processes, such as printing, die pressing, joint and packing. In the process of making, the adhesion of the box also belongs to the tail, but also an important part of it. The box body bonding of heavy carton is mainly divided into nail box and sticky box. But do you know the difference between nail boxes and sticky boxes?
The process and difference between the nail box of the heavy carton machine and the adhesive box machine of the heavy duty carton
The nail box is to be nailed to each other between the surface and the surface of the box, which is similar to the stapler seen in the daily life. But the difference is that it's bigger than the nail, and it's a double nail. There seems to be nothing to say about the nail box for heavy-duty cartons. Let's look at the box again. The adhesive box is divided into three types: manual bonding, semi-automatic bonding and full-automatic bonding. And the bonding is carried out in two ways: the bonding of the mixture and the bonding of the adhesive tape. The bonding of the bonding agent is in a semi-automatic manner, and the paper board which has finished the groove and the line pressing process is conveyed into a gluing machine, and the paper board is bent and spliced under the action of the guide wheel pressing wheel, and then the paper board is bonded after a series of actions are closed. The adhesive tape is a full-automatic bonding process, the paper board is fed, and the adhesive tape is cut and pasted. An interface between the opening of the heavy-duty carton and the board surface of the board, and the phase-bonded link.
The process and the manual bonding of the nail box of the heavy-duty paper box are a kind of bonding technology with low standard, and the quantity of the viscose and the adhesive, the bonding time and the strength of the bonding are relatively low. The semi-automatic paste box adhesive also has the advantages that the starting time is short, and the heavy-duty paper box with irregular line pressing can be adjusted and then sent into the machine for bonding. The full-automatic adhesive can release both hands, but it is not good to easily cause adhesive deviation, off-line, and failure caused by too fast speed, such as defective products, destruction boxes, and the like.
2.Adhesive is generally used for box refrigeration, because nails rust, but glue does not. Another situation is that the contents of the things afraid of hanging will generally be glued, because the nail order of the nailing machine may be hung into the inside of the goods.
3.In theory, the cost of adhesive is a little lower, but if it is not particularly large, the purchase price of adhesive should not be reduced.
4.If your box is too small (less than 10cm in height), then you can use sticker. The binding machine can't nail it, and the nail can't be nailed well.
