The key to the stable operation of the paper tube machine

The key to the stable operation of the automatic paper tube machine lies in standardized operation, regular maintenance, and timely troubleshooting. I have sorted out the key points for you, and following them can effectively reduce the risk of downtime.

1、 Standardized operation is the foundation

Safety first: It is necessary to wear protective equipment during operation, and manual adjustment is prohibited during operation to avoid accidents.

Parameter setting: Input parameters such as paper tube diameter and length through HMI touch screen, and use CNC system to automatically control to reduce human error.

Remote monitoring: Utilize the device's built-in remote control port to monitor the operating status in real-time and make timely adjustments.

2、 Regular maintenance is essential

Equipment inspection: Focus on checking dynamic equipment such as bearings and gearboxes, listen for abnormal noises, measure vibration and temperature; Static equipment should be checked for leaks in pipelines and tanks.

Lubrication management: Choose lubricating grease or oil according to the Spiral paper tube winding machine location. Waterproof lubricating grease is required for the forming part bearings, and lubricants with good rust prevention performance are needed for the pressing part.

Public media inspection: Regularly inspect media such as oil, water, and gas to ensure stable supply and avoid downtime caused by media issues.

The key to the stable operation of the paper tube machine

3、 Fault handling should be done quickly

Electrical malfunction: If the frequency converter cannot start, the motor heats up, or the operation fails, it is necessary to check the circuit, motor, or communication interference.

Mechanical failure: If the bearing heats up, rotates abnormally, or the drive roller slips, adjust the tension or wrap angle, and replace the components if necessary.

Wet end chemical influence: Control the water filtration performance of the slurry to avoid excessive flocculants causing abnormal operation of the paper machine.

4、 Other practical suggestions

Train operators: Ensure familiarity with equipment operation and maintenance procedures to reduce human errors.

Spare parts: Always keep vulnerable parts, such as bearings and seals, to shorten the time for fault repair.

Recording and analysis: Establish operation logs, record faults and handling methods for subsequent optimization.

In short, stable operation of the paper tube making machine requires a three pronged approach of operation, maintenance, and troubleshooting. If you have specific questions, such as detailed handling of certain types of faults, I can help you refine them further.

The key to the stable operation of the paper tube machine