When we use the master level operation, we should pay attention to that before cutting, we should adjust the cutting tool, clamp the working object and stop baffle plate. After the sequential test run, we can work by clamping and then releasing them. If the machine tool is rotating, any part of the human body can not contact the rotating parts. In operation During the operation, the cuff should also be tied, so as to avoid rolling, impact and crushing of the pipe. It is necessary to check that the dust removal device is in good condition, so that the pipe can be cut. When using the grinding wheel pipe cutter, it is necessary to check in advance whether the grinding wheel is damaged or cracked, damped, and whether the power cord is reliable. Change the cutter, measure the workpiece, lubricate and clean up The pipe head must be carried out when parking.
The maintenance of the paper tube machine is also very important.
When paper tube machine the starts to work, we should reduce the speed or directly adjust it to the lowest point. This avoids mechanical loss.
After the has problems, it should be powered off as soon as possible to find a professional for maintenance, not to repair by yourself, not to mention under the condition of power connection, so there will be a risk of electric shock.
The power supply shall adopt three-phase four wire system to avoid contact danger. In fact, there are many precautions in the whole operation process. When working, the most important thing is to be careful.
If you are also interested in this machine,please don’t hesitate to contact us:
Overseas manager: Tom Wang
Email:cartonmachine.tomwang@aliyun.com
Phone/Wechat/Whatsapp:+86 13303078975
